How To Repair And Resculpt Concrete Statues

A cement garden statue enhances the ambient of the garden and it gives nice landscaping every bit well. Yous tin choose from a wide range of the garden statues available and it surely helps you in making your garden space more than attractive. These statues are bachelor in all the unlike cost range merely the problem with these statues is that they are quite vulnerable to breakage and damage. This can be because of the falling tree branches or because of the extremely cold temperature.

Do you know that you can repair your cement garden statues and this saves you from purchasing a new one? Well, information technology is quite piece of cake to repair your garden cement statues and here is the process for the same.

Steps to Repair Cement Garden Statues

Step 1: The first step is to collect the broken pieces and move the garden statue in an open up surface area abroad from the delicate plants and pots. Once you do this, commencement by wetting the garden statue with help of the garden hose.

Pace ii: Go a non-abrasive brush or a sponge and scrub the statue with it. The chief purpose backside this pace is to remove the dirt and other debris which can be a prove stopper while repairing the statue.

Footstep 3: Now, you need to let the wet evaporate. Exercise not expose the statue to the oestrus or fire to quicken the process. Let information technology dry naturally. Go a quick patch epoxy and start reading the instructions on this. If required, mix the required contents of the epoxy. There are some unmarried tube epoxy available but we suggest you to get for the one with two tubes.

Step 4: In this pace, you need to use the epoxy on the statue later on mixing information technology and squeeze the broken pieces together. You lot can apply a soft applicator or putty knife for this. Ensure that y'all apply the epoxy properly earlier y'all stick the broken parts together. Apply the force per unit area on the parts for at least three minutes.

Pace five: Once the epoxy is a little hard, scrape off the excess from a putty knife every bit this would ensure that at that place are no ridges or bumps on the statue. You will accept a smooth cease with help of this step. Ideally, you can do this afterward xv minutes of application.

Step vi: Go out the statue at its place for 24 to 48 hours so that the epoxy hardens and sticks the parts together.

You have now repaired your cement garden statue. You tin use this process every bit it'due south cheap and it saves you from the expense of getting a new one. There is inappreciably whatever damage that tin can't be repaired with the process that nosotros have shared with you in this article.